Does Ohphonex Work When Behind A Nat?

Jan 16, 2004 - Here's hoping that the many VMs that flourished in 2003 will work better. And I've used it to have an OhPhoneX conference with Paul Venezia. The TiBook out from behind a NAT to do some videoconferencing tests.

1. Does Iphone Work When Behind A Nat Nat

• OhphoneX has a feature called 'IP address translation' that enables NAT transversal. However, you may need to enable specific port forwarding in your NAT.
• For example: I am behind an NAT and connect to a VPN server. When the server sends the data back to my network, how does my router know to send it. Jump to content. How does a VPN client work behind an NAT w/o port forwarding? Submitted 1 year ago by soyuz13. For example: I am behind an NAT and connect to a VPN server.

I have a windows 2003 server, running ISA 2004 that I am trying to setup as a vpn. I am able to configure PPTP and get everything working fine, but When I enable L2TP it stops working. The network looks like client -nat device-internet-nat device-isa vpn Connecting from an internal / same subnet computer works fine, and connects via L2TP quickly Using the wrong preshared key (either internally or externally) generates error 678. (I say this because the error when I use a wrong password is different than when I use the correct one) Using the correct preshared key externally gives error 789 I was under the impression that windows xp with service pack 2 was compatible with L2TP over nat? Is this even possible?

Hi, I have managed to find a solution to using DDNS from behind a NAT router. This came from some searching Vyatta forums. When you set up DDNS from behind a NAT router, your DDNS client regsiters your private address instead of the public one. As shown by the 'show dns dynamic status' command issued out of config mode. In order to work around this you need to edit a file by issuing the command below. Thanks for this hack.

It really saved some headaches for me (multiple DDNS updating). Just to clear things out for DNS-O-MATIC. The working setup should be as follows: 1. Editing of /opt/vyatta/sbin/vyatta-dynamic-dns.pl is as discribed 2. The following dynamic dns commands configure DNS-O-MATIC correctly: set service dns dynamic interface pppoe0 service dyndns host-name all.dnsomatic.com set service dns dynamic interface pppoe0 service dyndns login YOUR-DNSOMATIC-USERNAME set service dns dynamic interface pppoe0 service dyndns password YOUR-DNSOMATIC-PASSWORD set service dns dynamic interface pppoe0 service dyndns server updates.dnsomatic.com Please note that I am using pppoe and not an eth connection. For future reference, any update of the firmware will overwrite the 'hack' - i.e. The vi commands should be repeated.

Under the version 1.7.0 it's mucth easier: Simply go to the services Tab: Under Dns in the Dynamic DNS. Choose the interface (in my case pppoe0). Choose the web dyndns. Insert the text that should be ignored in Web-skip 'Current IP Address: ' (don't forget the space or it will not work!!). In service combo-box choose 'custom - ' and give a name 'NoIp'.

Does Iphone Work When Behind A Nat Nat

Input your hostname. Input your Login. Input your Password. In Protocol combo-box choose 'noip '. in Server input 'dynupdate.no-ip.com'. Press Apply button and you are ready to go!